The UK Dart 15 Association

giudance please

Dart 15 Chat
Post Reply
simon
Captain
Captain
Posts: 202
Joined: Fri May 06, 2011 6:47 pm

giudance please

Post by simon »

Hi All

I have recently sold my Phantom and bought a sprint sail 1970 having never sailed a cat, I rigged the boat on Sunday, went for play and had great fun reaching, now for the giudance, should the 15 be fitted with a Spanner Line? if so is it a peice of shock cord of about 4/5mm diameter, and does it fit from downhaul take off bracket to the inner cringle at the clew of the sail, I have read about this in the Cat Book. I have box with many different fittings and bit of rigging so I sure to be asking more silly questions

Thanks for any advice

Simon 1970
User avatar
WaveyDavey
Lieutenant Commander
Lieutenant Commander
Posts: 157
Joined: Mon Apr 02, 2007 12:45 pm

Re: giudance please

Post by WaveyDavey »

Hi Simon,

Welcome to Sprint sailing.

No spanner line is used on the Sprint 15 - I assume because the cut of the sail foot and/or the angle of the mainsheet is sufficient to control mast rotation without this addition. The Dart 18 on the other hand does have a spanner line - which is probably what's shown in the Catamaran book.

Cheers
David
David Ball
Sprint 15 1923 "Two's Complement"
Marconi SC
User avatar
Robert
Admiral of the Fleet
Admiral of the Fleet
Posts: 685
Joined: Sat Dec 16, 2006 5:14 pm
Location: Chelmarsh

Re: giudance please

Post by Robert »

Welcome Simon! Congratulations on your choice of boat - the Sprint 15 is brilliant and you should have some great fun with it. As for the spanner line, you don't need to worry about that as it is not part of the Sprint 15's rig. I expect the illustration you have seen is of a Dart 18 which needs some extra bits of string to give the crew something to do :lol:. Keep asking the questions and there will always be someone willing to help.
Good luck.
Robert England
George Stephen
Captain
Captain
Posts: 240
Joined: Fri Dec 15, 2006 8:36 pm
Location: Queen Mary SC

Re: giudance please

Post by George Stephen »

Simon,

Go to the Home Page on this site and click on "Manuals" in the left hand column.

The rigging maual is a bit dated, but it shows all the critical parts. It doesn't show the variations that have been allowed following Class Association Members proposals that have been voted in at an AGM and had subsequent "official approval".

The Parts List is the old Laser Centre Parts List, with the Laser Centre part numbers - Windsport use a different number system - I think it is the original part number system used before Laser Centre took over.
George 1594
Post Reply